 |
|
|
|
|
|
  |
|||
|
|
||||||||
 |
Type 301 P
Convincing Arguments! No mechanical seal lasts for ever. Even double seals are not strictly "safe" given that the two seals are installed at the same time and have the same expected lifespan. No manufacturer guarantees that the second seal will hold good after the first one has failed. Even the "disaster bushings" specified by the oil industry (API) are unable to rule out leakage when a seal fails. DEPAC safety seals are designed to guarantee a high level of process safety by controlling the leakage from a failed seal. The emergency seal is adjusted to an acceptable leakage rate and can stay in operation until the next scheduled plant stoppage. In extreme conditions requiring a double mechanical seal it is possible to upgrade the double seal with an additional safety seal. The higher price of a DEPAC safety seal stands in no relation to the expense of lost production! Notes On some pump designs the distance from the stuffing box face to the bearing housing is very short. The L4 dimension requires special attention therefore. The distance D2 to the SB diameter should be no less than approx. 1 mm (0.039") in radius if at all possible. Versions with larger packing cross-sections and/or more packing rings are available as special designs. Double cartridge seals incorporating this safety feature are also available. Hard chrome plating of the sleeve is possible for additional protection against wear. |
- ADJUSTABLE emergency seal
- Cartridge design
- Stationary design principle
- Balanced
- Gland alternatives
–Standard glands with or without special connections
– Gland with 1/4"NPT axial flush connections
– Gland for large stuffing box diameters
| RANGES OF APPLICATION |
|
| Pressure | 700 mm Hg (28" HG) – 28 bar (420 PSI) |
| Temperature |
Depends on the elastomer |
| Speed |
25 m/sec. (5000 FPM) |
| SIZES |
|
| Dshaft |
24 ... 100 mm |
| 1" ... 4" |
|
| MATERIALS |
|
| Metals |
DIN 1.4571, 316 SS/Hastelloy C |
| Springs |
Hastelloy C |
| Faces |
CA, SC, SSIC, TC |
| O-Rings |
FPM, EPDM, PTFE, FEP encaps., Chemraz, Kalrez, Aflas, etc. |
| Other sizes, materials or design versions on request. |
|