 |
|
|
|
|
|
  |
|||
|
|
||||||||
 |
Type 186 DIN 24960
Convincing Arguments! Balanced mechanical seals work with lower face pressure. This means lower face friction and therefore less wear on the face pair. The mechanical seal lasts longer! The O-ring mechanical seal Type 186 has a self-cleaning effect when media containing solid materials are used. The solid materials are unable to settle and the secondary seal moves "away" from the solids if wear occurs. Notes The mechanical seals with mounting dimensions and length dimensions produced specially for DIN 24960 can also be used of course in all other stuffing boxes. Our standard stationaries, glands and adapters are listed here and here. DEPAC also offers these mechanical seals as special versions with larger dimensions than the listed standard sizes. For O-ring dimensions or their "dash" numbers please ask us or one of our contracted partners. (This information is also available in every installation manual.) |
- For DIN L1KU dimensions
- Balanced for longer life
- Independent of the direction of rotation
- Can be used with various stationary faces
- No scoring of shafts or sleeves
- Springs outside the medium
| RANGES OF APPLICATION |
|
| Pressure | 700 mm Hg (28" HG) – 28 bar (420 PSI) |
| Temperature |
Depends on the elastomer |
| Speed |
25 m/sec. (5000 FPM) |
| SIZES |
|
| Dshaft |
18 ... 100 mm |
| 1" ... 4" |
|
| MATERIALS |
|
| Metals |
DIN 1.4571, 316 SS |
| Springs |
Hastelloy C |
| Faces |
CA, SC, SSIC, TC |
| O-Rings |
FPM, EPDM, FEP encaps., Chemraz, Kalrez, Aflas, etc. |
| Other sizes, materials or design versions on request. |
|